Announcement

Collapse
No announcement yet.

Selecting Auto Mode on a LabVIEW Dashboard using Network Tables

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Selecting Auto Mode on a LabVIEW Dashboard using Network Tables

    Network Tables enables two way communication between the Robot and the Dashboard, and is new in LabVIEW for 2013. It can be used to send several types of data between the robot and dashboard and from the dashboard to the robot. Several methods of using Network Tables to select and autonomous mode for the robot to run are demonstrated. The principles can be expanded to send and receive any type of data.

    Note: The attached library is compiled using the 2013 FRC version of LabVIEW.
    Attached Files
    Team 330 beta tester

  • #2
    Re: Selecting Auto Mode on a LabVIEW Dashboard using Network Tables

    It would be good to cover the Network Tables "how to" more throughly. Your Post here is the first documentation I've discovered for the Labview Smart Dashboard implementation. I see the vi's in Labview, but no real documentation and so we have no real idea how to use them.

    Comment


    • #3
      Re: Selecting Auto Mode on a LabVIEW Dashboard using Network Tables

      Hi Rich,

      You're right the documentation on the LabVIEW SmartDashboard and NetworkTables VIs is a little sparse right now. The context help for the SmartDashboard VIs and the examples provided by the default framework and dashboard code should get you started. If you have specific questions you can ask them to the FRC Technical Q&A and we'll be happy to try and answer them for you.
      FIRST®
      FRC Robotics Engineer

      Comment

      Working...
      X