Announcement

Collapse
No announcement yet.

Wire connections to sensor board

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wire connections to sensor board

    We have a gyro/accelermoeter board, looks like the standard ADW22307/ADXL345 board, but it just has through-holes in the PCB, no connection headers. Is there a recommended way to connect to this board? Are there standard size headers one can buy and solder to the board?
    Thanks.
    Jeff

  • #2
    Re: Wire connections to sensor board

    Yes, there are standard headers that support the 0.100" pin spacing used on the standard board. If your board has the same spacing , you can solder on a header like this. Your local Radio Shack probably carries them as accessories for their Parallax products, or you could find them at a R/C hobby store. Online the usual suspects, like mouser.com , carry them in almost unlimited variety.

    /Randy

    Comment


    • #3
      Re: Wire connections to sensor board

      Thanks for the info, Randy.

      Comment

      Working...
      X