Announcement

Collapse
No announcement yet.

Communications Wiring chart

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Communications Wiring chart

    Is there someone who can send me a link to a Communications wiring chart?

  • #2
    Re: Communications Wiring chart

    It sounds like you are looking for the Robot Data Connectivity Diagrams found on the Robot Control System Resources page. If that's not what you are looking for please describe in more detail and I will try to point you in the right direction.
    FIRST®
    FRC Robotics Engineer

    Comment


    • #3
      Re: Communications Wiring chart

      On the chart in the attachment it seems that the plugs come from the power distribution and plug straight into the cRIO cards, is there something that attaches onto the card or does the plug go staight to the the pins on the cards?
      Attached Files

      Comment


      • #4
        Re: Communications Wiring chart

        There are breakout boards which attach to the cRIO modules. The Getting Started with the 2012 FRC Control System document is the best document to walk you through getting the Control System wired up and configured.
        FIRST®
        FRC Robotics Engineer

        Comment


        • #5
          Re: Communications Wiring chart

          Originally posted by Wildbot3844 View Post
          On the chart in the attachment it seems that the plugs come from the power distribution and plug straight into the cRIO cards, is there something that attaches onto the card or does the plug go staight to the the pins on the cards?
          Where did you get that chart? There are several errors. It shows the Digital Sidecar getting its power from the power distribution board's regulated 12v output, rather then an unregulated port. It shows the radio regulator connected to the power distributions board's 5v output, rather then the regulated 12v output.
          Team 330 beta tester

          Comment

          Working...
          X